Chipboard screws
(IAN 510747)
Chipboard screws
(IAN 510747)
Category: Workshop and Hardware -> Hardware
Brand: Parkside Performance
Sold in:
Description
PARKSIDE PERFORMANCE® Screw set
Features
- According to DIN EN 14592
- Stainless steel A2
- Pre-drilling may be necessary in hardwood
- For load-bearing products made of structural timber
- Corrosion protection class 3 according to EN 1995-1-1
- Without washer
- Chipboard screw set (4.0 x 30 mm, TG)
- Countersunk head, TX20 drive
- Accessories: 1x special bit TX20
- Milling ribs and cutting groove
- 300 pieces, 4.0 x 30 mm
- Chipboard screw set (4.0 x 40 mm, TG)
- Countersunk head, TX20 drive
- Accessories: 1x special bit TX20
- Milling ribs, end mill and cutting groove
- 190 pieces, 4.0 x 40 mm
- Chipboard screw set (5.0 x 50 mm, TG)
- Countersunk head, TX25 drive
- Accessories: 1x special bit TX25
- Milling ribs, end mill and cutting groove
- 100 pieces, 5.0 x 50 mm
- Chipboard screw set (5.0 x 60 mm, TG)
- Countersunk head, TX25 drive
- Accessories: 1x special bit TX25
- Milling ribs, end mill and cutting groove
- 65 pieces, 5.0 x 60 mm
Product characteristics
| Set: | Chipboard screws (4.0 x 30 mm, TG) Chipboard screws (4.0 x 40 mm, TG) Chipboard screws (5.0 x 50 mm, TG) Chipboard screws (5.0 x 60 mm, TG) |
|---|---|
| Screw type: | chipboard screws |
| Thread type: | partial thread |
| Drive type: | TX |
| Head shape: | countersunk head |
| Screw length: | 30/40/50/60 mm |
| Screw diameter: | 4/5 mm |
| Hardness: | Screws: min. 200 HV 0.3 Bit: 58 HRC |
| Service class: | 3 |
| Material: | Screw: stainless steel Bit: steel |
| Weight: | Chipboard screws (4.0 x 30 mm, TG): approx. 500 g Chipboard screws (4.0 x 40 mm, TG): approx. 410 g Chipboard screws (5.0 x 50 mm, TG): approx. 410 g Chipboard screws (5.0 x 60 mm, TG): approx. 330 g |
